| 表面处理 | 镀锌 |
|---|---|
| 公称长度 | GN 717-4-M6-CK-ST |
| 公称直径 | 见参数（mm） |
| 类别 | 旋钮柱塞 分度销 |
| 应用范围 | **紧固件 |
| 标准编号 | GN 717-4-M6-CK-ST |
| 样品或现货 | 现货 |
| 标准类型 | 德标 |
| 品牌 | GANTER |
| 型号 | GN 717-C-NI |
| 加工定制 | 否 |
| 材料等级 | 见参数 |
长期供应山东 有卡锁旋钮柱塞分度销GN 717-C-NI 可大量供应批发
Printable version
Add to my favourites
Technical information
Threaded body
AISI 303 stainless steel.
Plunger
AISI 303 stainless steel.
Suggested matching hole with tolerance +0.03/+0.08
Locking nut
AISI 304 stainless steel.
"Push/Pull" knurled knob
High resilience polyamide based (PA) technopolymer, black colour, matte finish. Resistant to oils, greases and other chemical agents.
Standard versions available
- Type C: with knob, without locking nut.
- Type CK: with knob and locking nut, ISO 4035.
Features and applications
Indexing plungers with rest position GN 717-C-NI are used where positioning operations are required and in those applications where the plunger needs to be locked in the retracted position.
GN 717-C-NI are a range of low cost indexing plungers which score highly on small dimensions. Their use should, however be limited to such applications where high precision indexing is not required.
Due to comparably small dimensions indexing plungers GN 717-C-NI, it is adviseable to follow the data listed in above table regarding maximum tightening torque during assembly.
AISI 303 stainless steel, thanks to its high resistance to corrosion, allows the application of these indexing plungers on machines and equipment in those sectors where laws or particular hygienic, climatic and environmental factors make it mandatory to use corrosion resistant materials.
Standard Elements | Main dimensions | max. tightening torque in Nm | Spring pressure in N ≈ | Weight | ||||||||||
Description | d1 h11 | d2 | d4 | e | l1 | l2 min. | l3 | l4 | l5 min. | A/F | Preload | Max. load | g | |
GN 717-3-M6-C-NI | 3 | M6 | 12 | 6.9 | 32.5 | 3.5 | 12 | 7 | 10 | 6 | 2 | 3 | 12 | 4 |
GN 717-4-M6-C-NI | 4 | M6 | 12 | 6.9 | 33 | 4 | 12 | 7 | 10 | 6 | 2 | 3 | 12 | 4 |
GN 717-5-M8-C-NI | 5 | M8 | 16 | 6.9 | 43.5 | 5 | 16 | 9.5 | 13.5 | 8 | 7 | 5 | 24 | 10 |
GN 717-6-M10-C-NI | 6 | M10 | 18 | 6.9 | 52 | 6 | 20 | 10.5 | 17 | 10 | 15 | 5 | 21 | 19 |
GN 717-8-M12-C-NI | 8 | M12 | 21 | 6.9 | 63.5 | 8 | 24 | 13.5 | 20.5 | 12 | 20 | 6 | 22 | 35 |
GN 717-3-M6-CK-NI | 3 | M6 | 12 | 6.9 | 32.5 | 3.5 | 12 | 7 | 10 | 6 | 2 | 3 | 12 | 4 |
GN 717-4-M6-CK-NI | 4 | M6 | 12 | 6.9 | 33 | 4 | 12 | 7 | 10 | 6 | 2 | 3 | 12 | 5 |
GN 717-5-M8-CK-NI | 5 | M8 | 16 | 6.9 | 43.5 | 5 | 16 | 9.5 | 13.5 | 8 | 7 | 5 | 24 | 12 |
GN 717-6-M10-CK-NI | 6 | M10 | 18 | 6.9 | 52 | 6 | 20 | 10.5 | 17 | 10 | 15 | 5 | 21 | 24 |
GN 717-8-M12-CK-NI | 8 | M12 | 21 | 6.9 | 63.5 | 8 | 24 | 13.5 | 20.5 | 12 | 20 | 6 | 22 | 46 |
GN 717-3-M6x0.75-C-NI | 3 | M6x0.75 | 12 | 6.9 | 32.5 | 3.5 | 12 | 7 | 10 | 6 | 3 | 3 | 12 | 4 |
GN 717-4-M8x1-C-NI | 4 | M8x1 | 16 | 9.2 | 43 | 4.5 | 16 | 9.5 | 13.5 | 8 | 8 | 5 | 24 | 10 |
GN 717-5-M10x1-C-NI | 5 | M10x1 | 18 | 11.5 | 46 | 5 | 16 | 10 | 16 | 10 | 22 | 5 | 24 | 19 |
GN 717-6-M12x1.5-C-NI | 6 | M12x1.5 | 21 | 13.8 | 55 | 6 | 20 | 11 | 20 | 12 | 38 | 5 | 21 | 35 |
GN 717-8-M16x1.5-C-NI | 8 | M16x1.5 | 25 | 19.6 | 68 | 8 | 24 | 13.5 | 24 | 17 | 80 | 6 | 22 | 60 |
GN 717-3-M6x0.75-CK-NI | 3 | M6x0.75 | 12 | 6.9 | 32.5 | 3.5 | 12 | 7 | 10 | 6 | 3 | 3 | 12 | 5 |
GN 717-4-M8x1-CK-NI | 4 | M8x1 | 16 | 9.2 | 43 | 4.5 | 12 | 9.5 | 13.5 | 8 | 8 | 3 | 12 | 12 |
GN 717-5-M10x1-CK-NI | 5 | M10x1 | 18 | 11.5 | 46 | 5 | 16 | 10 | 16 | 10 | 22 | 5 | 24 | 24 |
GN 717-6-M12x1.5-CK-NI | 6 | M12x1.5 | 21 | 13.8 | 55 | 6 | 20 | 11 | 20 | 12 | 38 | 5 | 21 | 27 |
GN 717-8-M16x1.5-CK-NI | 8 | M16x1.5 | 25 | 19.6 | 68 | 8 | 24 | 13.5 | 24 | 17 | 80 | 6 | 22 | 80 |
欢迎查看长春茗允精密机械有限公司
（销售部）
各位朋友，大家询价时，请务必说明产品品号（即下表格中品号栏下的数字）。有需要产品技术
资料或者产品图片以及要询价的朋友，
欢迎通过网页右侧的“企业在线”联系我们的在线客服销售人员，我们竭诚满足您的所有需求。
小件商品我们使用快递发货，大件商品我们使用物流发货，方便、快捷、时效！
货物发出后，我们会有专门的售后服务人员跟踪快递及物流，确保货物能迅速、准确送达客户手中。
备注：我公司单笔金额1000元以上，含运费。（混批金额达到1000元，也可含运费）
以下是公司同类产品
长期供应山东 有卡锁旋钮柱塞分度销GN 717-C-NI 可大量供应批发
Printable version
Add to my favourites
Technical information
Threaded body
AISI 303 stainless steel.
Plunger
AISI 303 stainless steel.
Suggested matching hole with tolerance +0.03/+0.08
Locking nut
AISI 304 stainless steel.
"Push/Pull" knurled knob
High resilience polyamide based (PA) technopolymer, black colour, matte finish. Resistant to oils, greases and other chemical agents.
Standard versions available
- Type C: with knob, without locking nut.
- Type CK: with knob and locking nut, ISO 4035.
Features and applications
Indexing plungers with rest position GN 717-C-NI are used where positioning operations are required and in those applications where the plunger needs to be locked in the retracted position.
GN 717-C-NI are a range of low cost indexing plungers which score highly on small dimensions. Their use should, however be limited to such applications where high precision indexing is not required.
Due to comparably small dimensions indexing plungers GN 717-C-NI, it is adviseable to follow the data listed in above table regarding maximum tightening torque during assembly.
AISI 303 stainless steel, thanks to its high resistance to corrosion, allows the application of these indexing plungers on machines and equipment in those sectors where laws or particular hygienic, climatic and environmental factors make it mandatory to use corrosion resistant materials.
Standard Elements | Main dimensions | max. tightening torque in Nm | Spring pressure in N ≈ | Weight | ||||||||||
Description | d1 h11 | d2 | d4 | e | l1 | l2 min. | l3 | l4 | l5 min. | A/F | Preload | Max. load | g | |
GN 717-3-M6-C-NI | 3 | M6 | 12 | 6.9 | 32.5 | 3.5 | 12 | 7 | 10 | 6 | 2 | 3 | 12 | 4 |
GN 717-4-M6-C-NI | 4 | M6 | 12 | 6.9 | 33 | 4 | 12 | 7 | 10 | 6 | 2 | 3 | 12 | 4 |
GN 717-5-M8-C-NI | 5 | M8 | 16 | 6.9 | 43.5 | 5 | 16 | 9.5 | 13.5 | 8 | 7 | 5 | 24 | 10 |
GN 717-6-M10-C-NI | 6 | M10 | 18 | 6.9 | 52 | 6 | 20 | 10.5 | 17 | 10 | 15 | 5 | 21 | 19 |
GN 717-8-M12-C-NI | 8 | M12 | 21 | 6.9 | 63.5 | 8 | 24 | 13.5 | 20.5 | 12 | 20 | 6 | 22 | 35 |
GN 717-3-M6-CK-NI | 3 | M6 | 12 | 6.9 | 32.5 | 3.5 | 12 | 7 | 10 | 6 | 2 | 3 | 12 | 4 |
GN 717-4-M6-CK-NI | 4 | M6 | 12 | 6.9 | 33 | 4 | 12 | 7 | 10 | 6 | 2 | 3 | 12 | 5 |
GN 717-5-M8-CK-NI | 5 | M8 | 16 | 6.9 | 43.5 | 5 | 16 | 9.5 | 13.5 | 8 | 7 | 5 | 24 | 12 |
GN 717-6-M10-CK-NI | 6 | M10 | 18 | 6.9 | 52 | 6 | 20 | 10.5 | 17 | 10 | 15 | 5 | 21 | 24 |
GN 717-8-M12-CK-NI | 8 | M12 | 21 | 6.9 | 63.5 | 8 | 24 | 13.5 | 20.5 | 12 | 20 | 6 | 22 | 46 |
GN 717-3-M6x0.75-C-NI | 3 | M6x0.75 | 12 | 6.9 | 32.5 | 3.5 | 12 | 7 | 10 | 6 | 3 | 3 | 12 | 4 |
GN 717-4-M8x1-C-NI | 4 | M8x1 | 16 | 9.2 | 43 | 4.5 | 16 | 9.5 | 13.5 | 8 | 8 | 5 | 24 | 10 |
GN 717-5-M10x1-C-NI | 5 | M10x1 | 18 | 11.5 | 46 | 5 | 16 | 10 | 16 | 10 | 22 | 5 | 24 | 19 |
GN 717-6-M12x1.5-C-NI | 6 | M12x1.5 | 21 | 13.8 | 55 | 6 | 20 | 11 | 20 | 12 | 38 | 5 | 21 | 35 |
GN 717-8-M16x1.5-C-NI | 8 | M16x1.5 | 25 | 19.6 | 68 | 8 | 24 | 13.5 | 24 | 17 | 80 | 6 | 22 | 60 |
GN 717-3-M6x0.75-CK-NI | 3 | M6x0.75 | 12 | 6.9 | 32.5 | 3.5 | 12 | 7 | 10 | 6 | 3 | 3 | 12 | 5 |
GN 717-4-M8x1-CK-NI | 4 | M8x1 | 16 | 9.2 | 43 | 4.5 | 12 | 9.5 | 13.5 | 8 | 8 | 3 | 12 | 12 |
GN 717-5-M10x1-CK-NI | 5 | M10x1 | 18 | 11.5 | 46 | 5 | 16 | 10 | 16 | 10 | 22 | 5 | 24 | 24 |
GN 717-6-M12x1.5-CK-NI | 6 | M12x1.5 | 21 | 13.8 | 55 | 6 | 20 | 11 | 20 | 12 | 38 | 5 | 21 | 27 |
GN 717-8-M16x1.5-CK-NI | 8 | M16x1.5 | 25 | 19.6 | 68 | 8 | 24 | 13.5 | 24 | 17 | 80 | 6 | 22 | 80 |
欢迎查看长春茗允精密机械有限公司
（销售部）
各位朋友，大家询价时，请务必说明产品品号（即下表格中品号栏下的数字）。有需要产品技术
资料或者产品图片以及要询价的朋友，
欢迎通过网页右侧的“企业在线”联系我们的在线客服销售人员，我们竭诚满足您的所有需求。
小件商品我们使用快递发货，大件商品我们使用物流发货，方便、快捷、时效！
货物发出后，我们会有专门的售后服务人员跟踪快递及物流，确保货物能迅速、准确送达客户手中。
备注：我公司单笔金额1000元以上，含运费。（混批金额达到1000元，也可含运费）
以下是公司同类产品
13601744484